LHC01 - Hidrolik üstten bağlama clamp
Özellikleri:
- çift etkili
- maks. çalışma basıncı 50 bar
- min. çalışma basıncı 20 bar
Features:
Five available bore diameter :Φ25,Φ32 ,Φ40,Φ50,Φ63。
Use high-quality seal to avoid leakage and keep long operation
Lever principle design is applied on this hydraulic cylinder. Clamping work piece easily and improve efficiency
The material of the cylinder body and the piston is 45# steel, heat treatment,chrome plated.
Note:
Please don't exceed 1.5 times of the original length, if you need to increase the length of the clamping arm. The practical clamping force is 60% - 70% of the
theoretical clamping force. High temperature oil seals are available on request.
Bemerkung:
Wenn Sie den Hebellängenarm verlängern müssen überschreiten Sie bitte nicht das 1,5-fache der originalen Länge.
MODELLNR./ model no. |
Max. SPANNKRAFT/ max. clamping force [kN] |
SPANNHUB/ clamping stroke [mm] |
GESAMTHUB/ total stroke [mm] |
ÖLBEDARF, SPANNEN/ oil requirement clamping [cm³] |
ÖLBEDARF, ENTSPANNEN/ oil requirement unclamping [cm³] |
KOLBENFLÄCHE, SPANNEN/ piston area clamping [cm²] |
KOLBENFLÄCHE, ENTSPANNEN/ piston area unclamping [cm²] |
TEMPERATUR-BEREICH/ range of temperature (℃) |
LHC01S-25 |
1,92 |
22 |
24 |
11,78 |
8,09 |
4,91 |
3,37 |
-10~+60℃ |
LHC01D-25 |
1,92 |
22 |
24 |
11,78 |
8,09 |
4,91 |
3,37 |
|
LHC01S-32 |
2,94 |
28 |
31 |
24,92 |
18,69 |
8,04 |
6,03 |
|
LHC01D-32 |
2,94 |
28 |
31 |
24,92 |
18,69 |
8,04 |
6,03 |
|
LHC01S-40 |
4,71 |
30 |
33 |
41,45 |
34,82 |
12,56 |
10,55 |
|
LHC01D-40 |
4,71 |
30 |
33 |
41,45 |
34,82 |
12,56 |
10,55 |
|
LHC01S-50 |
7,49 |
30 |
33 |
64,78 |
54,42 |
19,63 |
16,49 |
|
LHC01D-50 |
7,49 |
30 |
33 |
64,78 |
54,42 |
19,63 |
16,49 |
|
LHC01S-63 |
11,87 |
30 |
33 |
102,83 |
92,47 |
31,16 |
28,02 |
|
LHC01D-63 |
11,87 |
30 |
33 |
102,83 |
92,47 |
31,16 |
28,02 |
A |
B |
C |
C1 |
C2 |
D |
E |
F |
G1 |
G2 |
G3 |
G4 |
G5 |
G6 |
H |
|
LHC01S-25 LHC01D-25 |
128,5 |
86,5 |
25 |
16 |
17 |
Φ6 |
50 |
55 |
41 |
18 |
26 |
6,5 |
4,5 |
7 |
2 |
LHC01S-32 LHC01D-32 |
149 |
97 |
25 |
18 |
20 |
Φ6 |
57 |
68 |
52 |
22 |
33 |
8 |
5 |
8 |
3 |
LHC01S-40 LHC01D-40 |
157 |
97 |
25 |
20 |
25 |
Φ8 |
60 |
75 |
56 |
24 |
33 |
13 |
4 |
10 |
3 |
LHC01S-50 LHC01D-50 |
174 |
104 |
25 |
22 |
30 |
Φ10 |
65 |
87,5 |
63,5 |
27,5 |
44 |
11 |
10 |
14 |
3 |
LHC01S-63 LHC01D-63 |
179 |
105 |
25 |
22 |
30 |
Φ10 |
69 |
98 |
74 |
32 |
48 |
11 |
10 |
14 |
3 |
I |
J1 |
J2 |
K |
L |
PORT WITH LINE TYPE |
M |
N |
Z |
S |
α |
O-Ring |
M40*1.5 |
50 |
60 |
37x37 |
Φ5.5-Φ9x5.5D |
2-PT1/8 |
23 |
23 |
25 |
M6 |
75° |
P7 |
M50*1.5 |
60 |
70 |
45x45 |
Φ6.5-Φ11x6.5D |
2-PT1/8 |
23 |
30,5 |
30 |
M8 |
75° |
P7 |
M55*1.5 |
65 |
75 |
50x50 |
Φ6.5-Φ11x6.5D |
2-PT1/8 |
26 |
33 |
32,5 |
M8 |
75° |
P7 |
M65*1.5 |
75 |
88 |
58x58 |
Φ8.5-Φ14x9D |
2-PT1/8 |
32 |
38 |
37,5 |
M12 |
65° |
P7 |
M80*1.5 |
90 |
108 |
70x70 |
Φ8.5-Φ14x9D |
2-PT1/8 |
35 |
48 |
45 |
M12 |
60° |
P7 |